Nice build been looking at this case thinking of switching from the Stremcom Da2 to the Dan case I have a I9 9900KF @ 5ghz
idles @ 42c and gaming load never goes over 67c gpu idles @ 56c oc to 1970 can go higher but I would have to run the fans higher gpu hits 70c cpu Im using nzxt x62. I wanted to know what are your temps with the I9 gaming load and under heavy load with that cpu cooler and are you running any avx offset?
I would put the fans on the outside I found temps cooler and it looks better to me I dont have to worry about the fans catching on any cables or tubes set them to pull cold air, I had them set to exhaust and temps were higher and the hot air was blowing towards me I didnt like that.
I found it better with the fans on the outside and more room for the hose and you dont have to worry about the fans hitting some of the cables inside.
what clock speed are you running the I9 9900k? Any avx offset? Did you undervolt the cpu?Im asking cause I have the same parts different motherboard I have Asrock z390 gaming phantom itx and and ftw3 1080Ti, I9 9900KF and same cooler you are using just waiting on the case.
I built in that case not too long ago and I was impressed with the temps for the cpu and gpu the case is very well made.I dont understand why it doesnt get more looks from people looking for a mini atx build.
If I remember right the I have tried 3 ways with the fans inside as intake and inside as exhaust. When used as inside as exhaust the temps were ok till I game it would get too hot for the gpu would rise to high 80s and cpu would to.
with the fans set to intake inside the temps would lower in the mid 70c for the cpu and gpu underload. Now with the fans set to to intake on the outside temps are lower both cpu and gpu idle at 37c and gpu underload stays in mid 60c and so the cpu mind that my I9 9900k is overclocked to 5ghz highest it gets is low 70c with no avx offset. I do have custom fan curves for both the cpu and gpu. All case filters are taken out.
congrats nice build from a fellow DA2, I got my build on here to its called Quicksilver fast-Powerful-Sexy and compact.
https://pcpartpicker.com/builds/edit/?userbuild=LkBbt6 if link doesnt work check it on my profile.
one of the best builds in itx
damn you got lucky cant find that and if you do they want an arm and leg for it.
Where did you pick it up cant find them anywhere
Did you stress test it with aida64 or prime95? Any offset on the AVX? I have the i9 9900KF in the DA2 with X62 temps stay at 64 gaming gpu hits 75 Under aida64 temps hit 87c. Im now have it overclocked at 4.9 avx2 1.28v. What are your vcore on the cpu? is it running at stock? Im using the Asrock Z390itx Gaming phantom the reason for asking I been thing of using the ghost as my new case and would like to use air cooler. I already have the cooler your using new in the box havent tested it yet with the i9 9900k.
What cooler are you using
one of kind havent seen pc mod like this one great job
I like the look of the yellow on speakers they look like KRK rocket
Nice build I have the same case and same cooler but have since used my x62 to cool my I5 9600K to 5ghz with good temps
I love the look of the Dark Rock TF but it doesnt fit my motherboard too well it was pushing up against my ram sticks I used corsair lpx and the Trident Z rgb both were being pushed. I tried every which way possible but its just didnt fit right. That being said it does work if you dont mind it pushing your ram.
Love this case I think its the perfect size not too small but small enough to house a 280 rad and full size gpu I love my DA2 have a silver build on here
I have the same case with the same cpu but Im using a diff motherboard and cooler I have the nzxt x62 and evga FTW3 1080TI I took out all the air filters and Im getting great temps now I would give AIO a try I have my cpu oc to 5ghz .
The side panels I love for there easy of use no screws to mess with fast and simple to put on and take off. I have my build here
Thats whats its all about for me trying to fit high end parts in the small package Just did my build in the Streamcom DA2
I ended up buying another case Streamcom DA2 I have on here
It wont fit unless you bend the lip on the case or cut out slot for the gpu to slide in I using a 1080 blower style card
Yeah I know its the one I wanted before I saw this case the temps on that case with a top cpu are gonna be bad its a main reason I picked the DA2 over all the cases M1 the ghost to me its looks better than the M1 and it fits bigger cooler and cost less and the ghost well its never in stock not gonna wait around till it comes back
We love that show here at home lol
So was I got tried of the waiting and saw this sexy box and it was in stock
Thank you I got off quite pc usa it was at my door in 2 days in stock unlike the Ghost S1 or all the other itx cases like Ncase and Da4 and cost less then those cases.
Thank you I picked up the skull at the Haunted mansion Zak Bagans
Looks great and the xbox controller as well
love the case I ordered one but had cancel my order my evga ftw3 evga 1080ti wont fit in the case I contacted support and they told good chance that it might not even though it under there website that it does fit.
nice do you have link to your build?
Its the long one :)
its plenty strong your card wont be going anywhere.
Its the alienware 34 ultra wide 120hz ips g-sync
thank you how are the temps I have a 9600k I just order that new aio 90m for the dan case think I can use it that case I have a 1080ti evga I wanna use as well.
Nice build looking to build in the Dan A4 case I wanna be able to use my evga ftw3 1080ti btw
where did you put the rad?
What is wrong with using the dark rock Pro on the i7 8700k it should be good enough for cooling that chip what was your temps?
What arm are you using for your montior? I have the same montior and Im using an arm I got from amazon it seem a bit to much weight for it it gets lose when I move it to much
I agree with the AW3418DW 34.1 I have the same montior I love it and its looks sexy AF
I just got this case and saw that you have on your parts list evga ftw3 1080ti I have the same video card was wondering if you
got it to fit in? but I see in the pic its not a evga ftw3 its a zotec?
34 inch 21:9
Looks great nice job
its solid it will hold your card
nice first build
Nice do you have any pic i would like to see it setup please
Its the longest one they have Thank you for the likes
I just got a bulldog 2.0 I found it on sale on amzon for $280 couldnt pass on it its worth that and more with the parts its comes with.
No I just changed out the keycaps thank you
Thank you might take a shot at it
I wanted a bigger screen but this one needs no power just uses the hdmi to power on.
Sorry misread your post try these caps Im sure you will like them