Nice build! +1 for another master case owner.
Amazing build! as a mastercase owner myself this makes me want to fully watercool my system.
Nice build! More I see mastercase maker cases more I wish I had gotten that instead of the pro 5.
Wow! Looks amazing.
Nice build! +1 and I feel your pain with the cable management in general with my HD fans and my node pro.
Another fellow Mastercase owner! Nice build +1
Another Mastercase owner! Nice build +1
Nice build +1
Great looking build!
Nice build! +1
Nice build! and i've done the same thing before with the HDD LED and Power LED it drove me crazy for a few hours lol.
I just got the vertical mount 2 weeks ago when I finally saw it on newegg. I'm definitely glad I got it hehe.
Very nice build! and yay another Mastercase owner +1
Nice build! +1 and I wondered how the corsair hd rgb fans would look in my mastercase and now i'm tempted to buy some lol
Very nice build!
Wow! build is amazing +1 hope this gets featured
I was able to get one from the asia pacific region cm store about 3 weeks ago. I just checked and they still have them in stock and they ship worldwide.
Your build looks great!
Another mastercase owner! nice build I really like the white painted interior. I been thinking of painting the inside of mines silver to match my motherboard.
Very nice set up!
Very nice setup! +1
Another Mastercase owner! Your build looks good.
Wow! your build looks amazing. +1
Build looking good.
Nice build! +1.
Thanks! and most definitely.
Nice build! And plus +1 for another MasterCase owner.
I Actually ended up buying some Demciflex filters for mines. It has a very fine mesh and when it gets dirty I just rinse it.
Nice build! MasterCase +1
Hey, I had no issues mounting it on the front and running a push/pull config and pulling air in as intake. cpu temps are quite good. idle is around 25C and under load so far the most its gone for me 54C with a average room temp of 28C. Also, I like putting the radiator up front so cpu/radiator gets cooler air instead of warm air if it was placed up top. Before the x62 I was running a Corsair h110i gtx and the tubes to the radiator wouldn't allow me to put the radiator all the way up like how i have it now. X62 has longer tubing and bit more flexible. Switching out the fans was also a big help from the stock ones it comes with and x62 has 4 fan plugs in case you want to go push/pull. I hope that helps if you have any other questions feel free to ask anytime. good luck on your 1st build =)
My room gets really dusty and also keeps my cats fur out to lol
Nice build! As a Mastercase owner myself automatic +1 . Check mines out sometime =)
very nice and clean build! +1. How did you like that case? it was one of the cases i looked at before I did my build.
Very nice build! and good choice on the mastercase I love mines. +1
As a Mastercase owner myself automatic +1! and very nice build =)
Very nice build! +1
nice build! +1 and dam looks like you can fit your old case inside the new one.
Moving the radiator to the front really won't affect temps to much. I, myself have a kraken x62 radiator up front and 1080 hybrid radiator at the back. You can get dust filters I bought some random sized Demciflex for my case they are all magnetic for front and back. And nice build btw =)
hey, I think the results would be similar. I just replaced the stock radiator fan and set a more aggressive fan curve which helps a bit.
Nice build! I also have a luxe and prob one of my favorite case I've owned.
At full speed they are loud. 1200 rpm or lower they are pretty quiet. I usually have mines around 1400 to 1500rpm but the noise bother me to much.
Thanks! to me its fairly quiet. Most of the time they are running at around 1200rpm.
Thanks! that will prob be what I do next. I been looking for some grey/silver cables but haven't had to much luck.
Thanks! Yeah I was planning on doing that at some point when I have as bit more free time.
At first they took some getting used to but they aren't that bad at all.
np man. I actually did the same thing to.
I'm using the EVGA Pro SLI Bridge V2, 3-Way/2-Way and yeah it's pci slot 1 and 5. Think the gap from slot 1 to 5 is 80mm
Nice build! Nice to see more Pro M cases.
Nice build! I also have a pro m and it's definitely my favorite case so far.