I would recommend you have the front and bottom fans has intake and have the back and top has exhaust, other than that great build
Im in the same boat has you, my 6 y/o pc died last October and trying to get almost the same parts list has you. Build looks great and those temps man damn nice
Hello fellow Asus GTX 1080 Ti owner, i would recommend you to look at Jayz2cents video about GPU sag since that GPU is THICC, the solution is simply using a screw at the back of the Motherboard
Hey bud, i would rotate the cooler so the fan intakes air from the front, as it is now its not pulling nothing
Nice build. But i dont think you realize how the GN test was done, it was a 6700k non delid and with a air cooler, you are saying that you only notice a difference of 3ºc but you have a AiO and a delid 8700k
When i wrote that the only thing i sáw in the description was "pending" nothing else
Is this your first build?
Heres some tips to improve the build:
1 - get a better cooler (intel stock coolers are decent on non-K cpu)
2 - get more RAM 16gb is ideal (2x8gb sticks)
3 - add one SP120 rgb in the back
What temps did you have in that case?
This build makes no sense.
1- unlocked cpu on b250 motherboard
2- rgb in a case without side panel
3- 120 gb ssd w/o any other storage and NO GPU
Corsair h110i v2 if you want a 240mm rad or Corsair h115i / NZXT kraken 62 if you want a 280mm
Well... i never had one because i have yet to build a pc (money is tight) but from what i read online, its the best thing if you plan to OC, they are easy to install and look nice
Overkill PSU but still very nice white and black build.
Front fans should be facing the front not the back, the SSD would look better on the side and push-pull air cooler would be better over the hyper 212 ( cooler master ma610p looks nice) or switch to an AiO. Also maybe change the rear fan to another red led one, other than that it looks nice.
Cool build, just 1 problem you should have the fans facing the front not the back
If thats your first time building a pc i would suguest youtube tutorials on how to build a pc.
There's major issues with what you did.
1 - GPU must go on the first slot
2 - Radiator fans should facing the front of the case
3 - cables are suposte to be in the back
4 - Consult your motherboard manual for accurate RAM placement
Wtf is that build? Were you trying to messy af?
You should really flip the cooler fan to the front
And theres so much different colors in your setup, black green and white would make your setup good but you have random reds
You should really change the rad fans to intake. And not sure why you typed your components and peripherals when they are already on the part list.
OP, i just want to point out somethings that i think are wrong.
1- your gpu should be in the first slot
2- all of your fans are intaking air from the back
3- yes, like you noticed already nzxt logo is upside down
What are the temps like in that case while OC