|$69.99||+FREE s/h||In stock||$69.99||Buy|
|$96.60||+FREE s/h||In stock||$96.60||Buy|
|( 6 new from $96.60. Last updated 5 hours ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.ca at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
350 mm / 13.78"
- 427 mm x 195 mm x 473 mm
- 16.811" x 7.677" x 18.622"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 39.384 L
- 1.391 ft³
- 16 points
- 1 month ago
from completed build 191128 GET TO THE COPPER
Good case, uncomplicated, affordable, would use again.
- 15 points
- 18 months ago
from completed build The Halloween Machine: Content Creator Build
The case was only $48, and it has a full tempered glass side panel, PSU shroud, magnetic dust filters, open interior, and looks great. The metal is thick and I found no sharp edges while working.
For this budget price you're sacrificing some of the finer things (no rubber grommets, only one installed fan, no included RGB, etc) but I was okay with that.
The case was a little hard to build in. My main complaint is that even though there's a spot for an optical drive, I found it was too tight a squeeze for my liking, and therefore did not include the optical drive in my case. (The back of the drive was butting right up against pins on the motherboard).
There could be more room for cable management on the opposite side, but if you squeeze everything in and tie everything down, you'll get it done.
Be sure to plug in all the proper cords you'll need onto your PSU (if it's modular) BEFORE placing the PSU in the shroud, because there's no way you'll get those cords plugged into the power supply once it's put in place. This will make any future upgrades requiring a new cord problematic, but I'll deal with it if the day ever comes.
My chosen PSU came with velcro straps, which helped a lot with cable management, as this case only provides a few small zip ties.
Overall, I'd recommend this case on the price and look alone. It's higher quality than you might expect, but noticeably not a $100 case, if only for the lack of frills. The final build looks beautiful, and temps are staying nice and low with ample air flow.
- 12 points
- 6 months ago
from completed build Go Big or Go Home - First Build
The case looks really nice and you can't complain too much about a tempered glass case at this price. The cable management was a bit difficult, but I managed to get all the extra/loose cables all tucked away. There are plenty of spots on the back to attach zip ties. I shoved all of my extra/loose cables into the HDD bay, which is empty because I am only using an SSD right now. If I need to add an HDD into my PC in the future, I'll have to deal with that.
The motherboard covers up one of the holes in the top left corner of the case. I had my MOBO screwed in and everything and I realized I could no longer use this hole for routing cables (and I really needed to put the CPU power cable through this hole to help my cable management OCD). So I had to unscrew the MOBO and do that, which was annoying but overall not a big deal.
The air flow is decent. I added 2 intake fans at the front and 3 blowers on the top/back. My system temperature usually sits around 26-30 (room temp is 22).
- 11 points
- 1 month ago
from completed build Piratecracker’s first build for gaming/streaming
This is a budget case, but it looks great once you install everything and take care of the cable management system. For our first build, it was pretty easy. The back panel has an outward indentation that allows more space for the cables. It comes with one exhaust fan that's pretty quiet. There's room for at least 4 more fans. We installed two more fans easily.
- 8 points
- 2 months ago
from completed build Ramza
Amazing value. PSU shroud, decent cable routing, USB 3.0 on the front panel, and a tempered glass window, for under $50 shipped. I wish it had standard PCI slot covers rather than punch outs, but that's understandable at this price point, as is the lack of cable grommets. Cable cut outs are functional, but not ideally placed for the 24 pin cable. HD audio cable was difficult to route to the board as it is all the way in the back of the case. Front panel connectors for Power/Reset/LEDs were almost flush with the shroud. Plug these in before mounting the board if you can.
- 7 points
- 3 months ago
from completed build First Build
This case is outstanding for the price but has some issues. The main one being that there is not enough room lengthwise so my GPU almost hits my 240 rad in the front. Another con is that the HDD bays are not removable. Another thing is that the cable management holes are in the wrong spots for good cable management. The best thing about this case is the price.
- 6 points
- 1 month ago
from completed build Purple Power
This case is insultingly underrated. It's dirt cheap, is aesthetically pleasing with the hexagons and mesh on top and front, has great air flow, a huge tempered glass window for only $5 more than the acrylic model, a PSU shroud, 5 USBs in front, an external bay, and decent cable management. I looked at far more expensive cases, but this one had everything I wanted all-around.
- 5 points
- 9 months ago
from completed build 1st Pc Build w/ reused parts
Great case with a tempered glass side panel. Plenty of air flow throughout the case. Only gripe is that cable management can be tight with the openings not as wide. So I recommend at least a semi modular PSU. The package delivered had plenty of padding inside the box. Overall for the price you get a pretty good quality case.
- 5 points
- 7 months ago
from completed build First build, all local parts
Does not come with enough fans to provide airflow but with fans has great airflow, has great build quality and a good quality glass window. Buy your own fans.
- 4 points
- 11 months ago
from completed build Genesis (Budget Ryzen First Build - 2019)
Beautiful tempered glass, a PSU shroud, dust filters, and plenty of room in a mid-tower case for under $40 was a no-brainer. Manual wasn't super clear, and screws were unsorted, but it works great and I love the look. UPDATE: I've brought it down to 4 stars as the screws on the glass panel strip very easily and one is completely unusable. Overall nice case, but the construction is not 5-star.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters