|( 12 new from $319.99. Last updated 2 hours ago. )|
|* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.ca at the time of purchase will apply to the purchase of this product.|
ATX Mid Tower
Side Panel Window
Front Panel USB 3.0
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
370 mm / 14.567"
Internal 2.5" Bays
Internal 3.5" Bays
- 23 points
- 1 month ago
from completed build Cygnet
I love the glass and easy-access doors, but it makes cable management a nightmare for a first-time builder like me since I can't very easily shove the cables inward with a traditional sliding panel like the unknowledgeable person I am.
- 17 points
- 2 months ago
from completed build Mid-High End Ryzen Build
Style and Function all in one package. I'm really happy with this case.
- 14 points
- 3 months ago
from completed build 8700k 1080 Strix Obsidian 500D RGB Build
I am in love with this case! I was previously using a 460x, which was great but became somewhat cramped. I considered going with a 570x, but it didn't seem like it had enough additional features to warrant changing cases (which is a major pain in the butt... I had to spread it out over two days). This is built on the same chassis as the 570x but had enough new features for me to pull the trigger. The hexagonal design on the front filter of the 460x/570x were a little much for me -- the cross design on this one seems a little more elegant. The glass doors are so ridiculously convenient that I don't think I can ever go back to regular panels -- it's so nice to be able to just open the door to access something inside. The dust filters are removed very easily and the fans are mounted using removable trays, which are held in by two thumb screws -- very convenient. I came from a 460x, which is, in comparison, pretty compact, so, comparatively, this was much easier to build in. I don't think I'd go so far as to say that this was "easy", as I haven't built in many cases and you certainly need to be mindful of the backside, since it's visible through the glass panel (granted, it is very tinted). Because the back glass panel is a door which closes using magnets, you can't just "stuff the panel closed", like I did with my 460x. If you have lots of RGB controllers like me, it can definitely get tricky. Luckily, there's an included cable cover that really helps get the door to close, as well as makes it look much better. There are plenty of grommets and cable tie points so the potential for proper cable management is certainly there, just expect to spend a little extra time.
- 8 points
- 28 days ago
from completed build Wallflower to Desk Tower
I had a rocky start with this case, having never dealt with fan controllers or lighting nodes, I wasn't knowledgeable on their placements within the case. It wasn't until I got to the point of routing all my fans and getting everything plugged in that I realized the Commander Pro that came with the case was factory mounted in a terrible, and utterly wrong, location. As you look at the case from the primary display side, the Commander Pro was mounted to the bottom right inside of the tempered glass. That means that if you were able to somehow plug everything in, you wouldn't be able to even open it, because the fan wiring would prevent it. I called tech support to ask them about it, and the tech acknowledged that it was a known issue and their solution was to use a blow dryer or other heat source to heat the adhesive to the put that it would pull off easily. I spent the MSRP of $250 just to have to use a blow dryer to remove and replace a factory mistake. Fortunately, in the end, it did work, and now I absolutely love the case. It was pretty easy to build in overall, and it seems to flow well enough. The LL fans look outstanding, and the build quality is top notch. Cable routing can be tough, especially since the routing side is also tempered glass that closes by way of magnets. If you don't route well enough, the glass won't fully close.
I do love this case, but the initial problem and tech support's solution really put me off. There was no attempt to reconcile the issue on Corsair's side, other than to tell me to fix it myself. I would have appreciate it if they had extended some kind of nicety to me, such as a coupon or something for my trouble, but there was no such offer. At the end of the day, I do love the case, and I would recommend it for someone looking for a well built, and well lit case.
- 5 points
- 2 months ago
from completed build ROGair
This case looks freaking amazing. I was kind of iffy when I saw how dark the tint was on the glass, but when that sweet RGB shone through it, it turned out to be a perfect shade. I realised that the garbage cable management job I did on it didn't matter at all and was completely shadowed out! The only downside is that the case has no place to show off your SSDs in the main compartment of the case, only at the back. This is a problem for me because I have that side of my case blocked off by a wall. Not a big deal though because most people won't have this problem and this was a one-time thing.
LL Series fans and Commander pro included with case The Commander Pro is really cool with its features, though I feel like the fan curve that was named "Quiet" was supposed to be quieter than it was. Other than that, the RGB implementation looks great on the fans no matter the size and they are quiet when you want them to be (after you install iCue) and perform well when needed.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters