|( 6 new from $79.98. Last updated 11 minutes ago. )|
|$104.99||Out of stock||$104.99+||Buy|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.ca at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
360 mm / 14.173"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 9 points
- 3 months ago
from completed build First build after 20 years of not building
Spacious case for the setup I did. No issues with crowding. The front of the case was a little difficult when adding the DVD R/W.
- 8 points
- 24 months ago
from completed build Budget Ryzen 3 Build. FULL SETUP(Monitor Included) $900 CAD.
Good, Cheap case. I got this case on sale at Amazon for $44 with free shipping, the shipping took 1 and 1/2 weeks. When I got it the box had a dent in it, but the case was fine, that's what matters anyways.
When it says THUMB screws, it isn't really THUMB until you unscrew it and screw it back in a few times with a screw driver until its able to be screwed with your thumbs. The MOBO standoffs are a bit cheap, I stripped one while I was doing cable management. DON'T be like me and do that, if you're going to use the CPU cable cutout then PUT THE CABLE THROUGH it first! I had to unscrew my mobo and stripped one of the standoffs. The painjob wouldn't be the best, as some edges don't have enough paint, or its chipped.
Another thing I liked is that the expansion slot covers ARE screwed in, NOT like the other cheap cases with BREAKOFF covers.
The case has alot of room for cable management, and the cover fit easily back in after I did some cable management. I'm guessing it would still fit if you don't do any, but I would recommend DO IT!
I would recommend this to any builder on a tight budget.
- 7 points
- 37 months ago
from completed build 6 Years of Change
Cheap, short, bulky. Perfect for my setup as I needed something short enough to fit in my desk and wide enough to fit backside cable management along with a large cpu air cooler. It also does in fact fit a Corsair H100i when mounting the radiator on top. You will want the tubing along the rear of the case and to use a slim rear exhaust fan. This also fits very large graphics cards (including my 1070 amp! extreme which is over a foot long) as the hard drive cage starts about 3 slots down vertically from where the card would be installed. As long as the card isn't somehow longer than the case it will fit.
- 6 points
- 9 months ago
from completed build Imperium — My first build
The fan LEDs are simply amazing to look at. The cable management was a slight problem, as there were very few holes and none above the motherboard, so I had to snake them through the hardware
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters