|( 7 new from $209.99 . Last updated 12 minutes ago. )|
|$217.00||Out of stock||$217.00+||Buy|
|$229.99||Out of stock||$229.99+||Buy|
|$237.65||+FREE s/h||In stock||$237.65||Buy|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.ca at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Gen 2 Type-C
- USB 3.2 Gen 1 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
440 mm / 17.323"
Internal 2.5" Bays
Internal 3.5" Bays
- 48 points
- 16 months ago
from completed build Entry Level Gaming PC
Very good construction quality. Virtually identical to the Define S2 but with more airflow and the Meshify aesthetic. Only gripe was the very little clearance between the top AIO and the ram. Very difficult to run cables through there. Also the motherboard wouldn't really fit properly onto the center peg. Don't know if that's the mobo or Fractal's fault on that one. The front panel was also a pain to work with as it is connected to the front IO so you can't fully remove it. I had to set the panel on top of my head so I could get the 3 front fans screwed in.
- 21 points
- 4 months ago
from completed build First Computer Build
I love the look and the design of the case. The case supports both top and front mounted radiations and comes with two case fans included. There is a PSU shroud and plenty of extra room for any drives. There are cable channels with pre installed Velcro straps for cable management. Very glad I chose this case for my first build.
- 13 points
- 13 months ago
from completed build Baby Blackout
They replaced that horrible power button
Awesome features like the button to pop the top filter out and easily removable 3.5" and 2.5" drives
Mesh front panel
Long basement leaves plenty of room for cables
PWM fan hub in the back
Just looks really damn good honestly
- I do like that the side panels come off with a pressure click, but it's removing the panel afterward that you should be more careful with, I found it to be a little awkward. Could've just been me though.
- 10 points
- 12 months ago
from completed build Ragnarok
Originally I was looking in the <$100 range, and the Meshify C caught my eye. I like that the design is interesting, without being over-the-top. I find NZXT's square cases dull, and Coolermaster cases better suited for teen boys than manly men like me. This was a happy middle. Except I didn't like how compact the Meshify C was, especially since I had a larger graphics card, and I wanted to make sure I had room for more robust cooling if I decided to make those upgrades in the future.
Meshify S2 was the perfect solution. Its basically just a longer version of the Meshify C. Almost a little too roomy, but it was easy to work with. PSU shroud was a little tight to get the power supply in, and I cut up my knuckles on the CPU cooler a bit trying to squeeze in to get the top motherboard screws, but the velco and ample pass-throughs made cable management easy for a novice like me.
Plus its really pretty.
- 8 points
- 6 months ago
from completed build Runaway upgrade project... DONE (Fingers crossed)
I thought the Meshify C was my favorite case to build in, that is until I built in a S2. Cable management was awesome, harddrive bays on the rear are great for stashing Commander and node pro modules. Very nice case!
- 6 points
- 7 months ago
from completed build The Walletslayer
Case is roomy, fully featured and built really well. Its large but it still fits on my desk nicely. I have to mention the front panel connections though, they are attached to the front panel so when I was installing the fans I had to get creative to work around it. Nothing broke so I'm happy.
- 6 points
- 5 months ago
from completed build First PC build. Ryzen 7 and GTX 2080 super
I am so glad I got this case, works great and has tons of room. I really liked that it had a fan control unit on the back, so that I could plug any fans (including the 3 included) into this hub and everything just worked. Plenty of cut outs for cords to organize. I will also add the fans seem silent. I had to check to make sure they were running it was so quiet.
I would check the dimensions of you have space concerns, it is not a small case for a mid tower.
- 5 points
- 1 month ago
from completed build Virus Build
The case was a pleasure to work with overall, though I hope they fix a few things with whatever airflow version of the Define 7 eventually is released. The way the IO is connected to the front panel sucks! As does the lack of fan wire routing options upfront. Also wish their was an official solution for vertical PCI-E that didn't 'put em on the glass.'
- 3 points
- 4 months ago
from completed build College Insanity
L O V E this case. It was recommended by a good friend, and he kept being pushy and had my doubts. Initially I was trying to watercool my rig until I changed my mind, but this case has SO MUCH ROOM, it's insane. Definitely love it, and it stays super cool.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters