|( 10 new from $99.99, 2 used from $88.19. Last updated 5 hours ago. )|
|$117.80||Out of stock||$117.80+||Buy|
|$119.99||Out of stock||$119.99+||Buy|
|* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.ca at the time of purchase will apply to the purchase of this product.|
ATX Mid Tower
Side Panel Window
Front Panel USB 3.0
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
410 mm / 16.142"
- 500 mm x 223 mm x 475 mm
- 19.685" x 8.78" x 18.701"
Internal 2.5" Bays
Internal 3.5" Bays
- 52.962 L
- 1.87 ft³
- 27 points
- 13 months ago
from completed build "Dark Forces" (Star Wars) - RGB Gaming PC Build 2018
For an RGB build this Case looks AMAZING ! (personal preference). Easy to build, good for cable management and reasonable price. Comes with 3x cooler master, master fan pro 120 RGB fans in front preinstalled and 1 x 120mm exhaust fan (black which was replaced). Thermals are also good (has no top fan mounts though). Tempered Glass window is of good quality and looking great.
- 9 points
- 14 months ago
from completed build [Insert Edgy PC Name Here]
This is actually a very recent addition to the build (~ April, 2018), before that I was running it caseless and turning it on with a screwdriver. Tempered glass is absolutely gorgeous, and the rgb fans are beautiful to boot. It is a bit chokey airflow wise, but that's about it. Cabling took less than 10 minutes and the case came with zip ties. EDIT: Didn't realize this until recently, but the acryllic front panel cover is easily removed, and can even be replaced by the mesh one included with the MasterBox 5 regular, which completely changes my negative thoughts on this case relating to airflow, although it doesnt look nearly a pretty without the included acryllic front panel.
- 6 points
- 6 months ago
from completed build Gaming Rig for my Friend
Drop your motherboard into this ****** and watch the colors fly
- 5 points
- 10 months ago
from completed build Artesia - My first pc build!
An excellent case! The three front rgb fans are beautiful and are pretty quiet!
- 5 points
- 3 months ago
from completed build Superfriends (First Build)
RGB looks awesome, very easy to build in and very spacious. Only problem is that the air flow is a bit constricted for the front fans, but this is remedied if you take off the plastic front panel. Hard Drive enclosures look really nice and are located right in front of a fan. The dust filters and psu shroud are also nice additions. I do wish there was a slot for top mounted fans though.
- 5 points
- 18 days ago
from completed build Nerd Rage - I5-8600k 5GHz OC
Great case for a first build. The RGB looks nice and the cable management is really easy. The PSU shroud is a bit loose and doesn't stick in its place with my fan cable, but I could have plugged it in a top header if I wanted to avoid this. It's got plenty of room and my Noctua NH-D15s fits perfectly, almost touching the tempered glass. I wish that the front panel was made of mesh (like the the MasterBox 5) instead of plastic with openings on the sides. I gets filled with dust really quick, doesn't filter anything and reduce the amount of air getting in the case. It also has a lot of mounts for SSDs and HDDs, way more than what I'm using.
- 3 points
- 7 months ago
from completed build My Final First Gaming PC
Nice easy case to work around and very cheap!
- 3 points
- 2 months ago
from completed build Budget Enthusiast Gaming & Editing PC Build
Amazing case, great cable management, and beautiful. High build quality and not hard to setup at all.
- 2 points
- 4 months ago
from completed build Home Rig 1.0
I was seriously debating this review. almost gave it a 4/5, but decided against it, based on 3 factors which I will list from least to most severe.
Short Basement. The basement doesn't extend far enough, making cable management direct from the PSU tricky, and ultimately unsatisfying. I realize the drive cage is in the way, but considering the popularity of SSD and the room directly above where the RIVETED the cage, I don't understand why the cage would have to be where it is.
Panels. Sigh This one may really seem nit-picky. The Panel over the front intake doesn't seem like it allows for a healthy amount of air flow and is very succeptable to being pushed past its seating, possibly damaging your fans. The glass side panel is weird to close. When closed properly, it doesn't fully look closed, so during the act of putting the panel on, its kind of similar to plugging in a flash drive; its wrong you do it the first time, wrong the second time, then correct when you try it the same way as the first time.
Fan power leads. Short! Short, short, short! Very difficult to reach the fan headers on the MOBO, making direct connection to the PSU the easier option, limiting option for fan adjustments.
All that aside, it is just an okay case with some RGB fans.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters
- Intel Core i7-8700K
- GeForce GTX 1060 6GB
- AMD FX-9590
- Radeon RX 480
- Intel Core i5-8600K (@4.1GHz)
- GeForce GTX 1070 Ti