|( 7 new from $177.99. Last updated 10 minutes ago. )|
|$182.99||Out of stock||$182.99+||Buy|
|$185.00||Out of stock||$185.00+||Buy|
|$186.91||Out of stock||$186.91+||Buy|
|$189.99||Out of stock||$189.99+||Buy|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.ca at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
Yes - 280 mm
- 31 points
- 12 months ago
from completed build Financial Mistake - 9900k + 2080ti
With stock fans on a moderate profile, it keeps my 9900k around 28C idle and 70C under full load. Fit and finish are good. Install was relatively painless. I just wish there was a better way to route the USB cable off the block.
- 27 points
- 13 months ago
from completed build ORION 2.0 ~ Red / White Music Production / Gaming Build
I just got it, it's definitely pretty, but it just looks cheap. It feels quality, but the pump just looks like flimsy plastic. It keeps the CPU cooler than my old Cryorig H7, but not by a large amount. Still a great cooler, and I trust it not to leak all over my stuff.
- 22 points
- 18 months ago
from completed build Imagine... Dragons
Keeps my 8700K nice and cool that's overclocked to 4.7GHz on all cores. Love that you can customize the light effect and also love the fact that they come with ML Fans. Silent and cool.
- 19 points
- 21 months ago
from completed build The Dead Yeti
Complaints: The fan cables that extend out of the main cooling cover for the CPU make cable routing a bit tricky. The fan connector is also NOT long enough to stretch to the Phanteks fan controller, so I just routed it out and back in and removed the controller altogether. Shame.
The radiator is surprisingly wide for its size and intended purpose. I added it to the intake portion of the case to ensure if was receiving the coldest air possible and not soaking in the heat generated from the case. I wish I could move it up another inch or so in the case so the cables don't rest on the GPU. However, my case doesn't seem to have the rails go up far enough.
Cooling seems very strong. I'm not a big fan of overclocking and risking the hardware just to pump up a number. Thus, it's more than enough for me. I don't really get above 50 C on Prime95 and the system is very quiet. I replaced the loud Corsair fans with the Phanteks fans that came with my case. Temps seem the same.
As for the RGB, I really like the settings and adjustments. My favorite setting allows the RGB to change with the color of the CPU. This is ultra cool (or hot?).
- 18 points
- 23 months ago
from completed build i7-8700K/GTX 1080 Gaming/Streaming/Music Archiving
Insanely quiet AIO. Paired with two be quiet! Silent Wings 3 140mm fans, it is inaudible at full load and beats large air coolers (e.g. the Dark Rock Pro 3) in noise:performance ratio.
- 15 points
- 18 months ago
from completed build First Build... Without a Graphics Card
I want to give this cooler 5 stars, but the only thing keeping me from that is their software is really buggy with this cooler. In Link, it doesn't even show up whether it is plugged into the motherboard or the Commander Pro. I was able to get it to show up in iCue, but I'm just not a fan of that currently. It did show up in Link once and that was only after I installed iCue. I haven't been able to control the lighting or the pump speed at all though which is a disappointment. On the actual cooler side of things, it works great! I don't see temps above 65 even while overclocking. I did replace the stock ML fans that it comes with with the RGB MLs that I already had though so I can't really speak to those. It really is a great cooler though and if they can fix the software implementation, I would easily give this 5 stars.
- 13 points
- 22 months ago
from completed build Corsair/Ryzen Build
This thing is worth every penny. 40/65c temps at idle and under load respectively on a 1700x clocked at 4.0ghz. I didn't even use a super high-end thermal compound either, just run of the mill artic silver for $6. I'm tempted to put something a little better on and see if I can climb over 4.2ghz stable.
- 13 points
- 21 months ago
from completed build The Commodore
Good AIO for the money. Nothing fancy. Little room for customization with rgb and colored logo plates.