|$44.99||Out of stock||$44.99||Buy|
|( 1 new from $44.99. Last updated 3 minutes ago. )|
|$44.99||+FREE s/h||In stock||$44.99||Buy|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.ca at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
- MATREXX 30
MicroATX Mini Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
250 mm / 9.843"
- 405.8 mm x 193 mm x 378.2 mm
- 15.976" x 7.598" x 14.89"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 29.62 L
- 1.046 ft³
- 13 points
- 13 days ago
from completed build Budget Used Part Gaming/Workstation $500
Cheap case, which I expected going into this build. Though admittedly stylish on the exterior, which is what convinced me to buy it. Gotta say, cable management was near impossible with this case. There IS space behind the back panel to route SOME wires. Though the amount of space the back panel offers is less than half an inch. Rendering the possibility of routing your 24-pin through the back impossible, as the wire bundle is too thick. There were other routing problems we ran into, and ultimately had to have a good portion of the wires clearly visible through the glass panel. Certainly not a deal breaker, and I wasn't expected $100+ quality. 4 stars for effort, external style, and affordability.
- 12 points
- 1 month ago
from completed build 191202 Whynaught Apparatus (Updated)
One glaring complaint here instantly broke a star off the end of this rating. Deepcool, what are you doing with this front intake that almost fits two 120mm fans? I can't see why this is not just drilled a few millimeters higher to hold 2 fans. It's like you wanted to disappoint somebody. Well, zip-ties to the rescue.
- 7 points
- 3 months ago
from completed build General Purpose PC
No obvious sharp edges, every thing seemed to fit. Real tempered glass. On the negative side, the I/O shield was hard to position positively, cable management is pretty marginal, and there's no manual I could find, not even online. The single included fan is OK. The case isn't a bad looker, and the airflow is decent enough if you add a front intake fan. Between this and the DIYPC F2, I'd take the DIYPC for most builds, for the more and better fans and better airflow.
- 6 points
- 5 months ago
from completed build Budget Build for Buddy
Difficult to build in, but extremely cheap. The tempered glass is what really makes this case worth it.
- 6 points
- 3 months ago
from completed build Small and Practical First Build
This was the toughest part of my build. I bought this brand new from a well-known retailer, but it came without a paper manual inside the box, digital manual on the manufacturer's website and never got one after I emailed them directly requesting a copy. I bought this on sale and was anxious to get this build going, so I moved ahead without one. The 3.5" cage (bottom) and optical drive cage (top) are pop riveted, no M3 screws. I can only add one 120mm fan on the front panel, potentially two if I remove the drive cages. Thermals and airflow are OK considering this sees moderate use. The cable management inside the case is OK but may add cable supports around the motherboard. But at less than $50 I expected some compromises, so ¯\(ツ)/¯
- 5 points
- 4 days ago
from completed build Workshop PC
Rivets used instead of screws in many places which get in the way constantly. There is minimal room for cable management, but just a bit above having none at all. For whatever reason the lower front fan mount holes are made smaller than fan mount screws. Decent enough for a budget case, just has odd manufacturing decisions. Has glass, which is nice, but doesn't offset the obvious design defects.
- 3 points
- 2 months ago
from completed build AMD Budget Build
It is a solid case for its price but if you had the budget, I would recommend a case with better cable management. It also came with no manual. Glass was a nice addition to price
- 3 points
- 18 days ago
from completed build JaiKob 2.0: A Heartwarming PCPartPicker Holiday Build and Story
Good value micro-ATX case with a tempered glass side for a mere $40 Canadian. Solid build quality.
- 2 points
- 15 days ago
from completed build Xander's Build
If you're a new builder, don't buy this case. Cable management was very difficult as the cable holes get covered up by a mATX motherboard, forcing us to use an SSD mounting location as a routing hole. No PSU shroud either means we have to hide everything in the back... unfortunately there's very little space behind the motherboard. A challenge, but experienced builders might manage to make a great looking AND compact build in this case though. Definitely buy a modular PSU if you go for this case.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters