* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
- Three Hundred Two
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
Motherboard Form Factor
- Thin Mini ITX
- Mini ITX
- Micro ATX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
318 mm / 12.52"
- 513 mm x 228 mm x 469 mm
- 20.197" x 8.976" x 18.465"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 54.856 L
- 1.937 ft³
- 8 points
- 50 months ago
from completed build Plain Jane
I was a little apprehensive about this case - it's not very new, I thought it'd be massive, and it's not very glamorous. Turns out, I didn't want glamorous, it doesn't matter that it isn't a newer design, and it's not super massive. It's exactly what it's billed to be.
I only have two complaints: I wish the bare metal in the case was painted black. I did not make a flashy build, but it just looks soooo much better black.
Second, there is a metal tab to delineate the inside edge of where the PSU should sit. It's just the sheet metal of the case bent up in a small rectangle. In my case, that wasn't bent at all perpendicular to the bottom of the case, so it angled inward; it required using pliers to straighten that before I could get the PSU in. Again, not a big deal.
What others said about half the vents not being filtered is true and strikes me as a bit silly, but I don't think it renders dust control "meaningless." The two main intake fans are filtered. The PSU intake (on the bottom of the case, no less, is filtered. That's pretty important and probably helps cut down on dust quite a bit.
Overall I'm super pleased! Nice and simple looking case that is entirely unoffensive.
- 8 points
- 10 months ago
from completed build Double Trouble (Dual Power Supply PC)
The Antec Three Hundred Two is a large case for the motherboard, but I had to use a larger case because I needed space for all the hard drive and power supplies. The case allows lots of room for components and mounting of HDDs or SSDs as well as wiring.
- 2 points
- 13 months ago
from completed build Workstation for Occasional Video Editing
Love this case! Nicely formed steel insides with rolled-over edges add lots of strength and don't cut fingers or cables, 6 full size and 2 smaller bays (although one is under/behind the MoBo), good cable routing options, great (quiet) fans and decent filters.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters