Description

Build inspired by Deadpool, with predominant black and red colors. A box with tempered glass, the well-known NZXT S340, has been used. Memory, Extension Cables in Red, and NZXT AER fans with two led strips form the personalization. The noctua fan NHU-12S has been replaced by the same model but in its industrial version PPC 2000 PWM with red rubber. The end result has been a mid-range team that I hope will last for many years. And I hope you like it too.

Greetings to all.

Part Reviews

Memory

These are great, I've been using them for a long time in both intel and amd. Always with no compatibility issues, on this board with the latest Bios I have managed to run it has 3066Mhz. but not at 3200Mhz. which they promise for now.

Video Card

Excellent graphics card, at this time sufficient for what I play in high grades at 1440P.

Case

A wonderful box with a minimalist design, very compact and a perfect wiring management. Perfect cooling possibilities, both liquid and air.

Comments

  • 28 months ago
  • 2 points

Very nice setup, Sir.

  • 28 months ago
  • 1 point

Thanks ¡¡

  • 28 months ago
  • 2 points

This is 1 for 1 what I intended to build and looks great! Some how I ended up spending about $1000 more because of a lack of self control.

  • 28 months ago
  • 1 point

Hmmmmm what's with the review of the case being in Spanish? lol

  • 28 months ago
  • 1 point

I'm sorry, I'm Spanish. I passed that translation. :-)

  • 28 months ago
  • 1 point

lol, I just thought it was funny cause you did the others in English _^

  • 28 months ago
  • 1 point

Awesome setup mate! I was thinking to make the same build.. Did you have any problems with the motherboard? Like Bios,RAM speeds?

  • 28 months ago
  • 1 point

Not at all, everything has been compatible correctly, the RAM modules I have running at 3066Mhz. I have not managed to have them at 3200Mhz. but they are very close.

Thank you

  • 28 months ago
  • 1 point

Hmm great .. Would you suggest going for the same motherboard since it fits awesome, or maybe something less expensive like MSI Tomahawk or MSI PC Mate? Also would you suggest 3200Mhz RAM or 3000Mhz since it's still on 3066? ( probably 8gb atm ) Btw since i'm on budget would you suggest Gtx 1060 3gb or 6gb? Sorry for asking a lot of questions!

  • 28 months ago
  • 2 points

Motherboard: This asus is a little overhead in components, better sound card, better network card, better VRM for voltage regulation next to the GYGABYTE B350 gaming 3 for me are the best in this chipset. Although the MSIs are great too.

The GTX1060 without hesitation would buy in 6GB thinks that not only changes the amount of ram but the chip is different. The GTX1060 6GB yields more than the 3GB.

RAM on RYZEN platform is important with what you get at the maximum speed you can afford. Since when the bios improve, the extra speed in RAM is very noticeable, by the communication between cores.

I hope I've helped. Regards, and thank you very much.

  • 28 months ago
  • 1 point

Great,i guess i'm gonna go with the Asus Strix then as i was thinking :)

For the ram i'm probably going for 2x4gb 3000Mhz or 3200Mhz,hope it's gonna be fine.

Now for the graphics card i agree,i'll try to extend my budget and go for the 6GB.. Would you think cutting off SSD and getting HDD and the 6GB version is gonna be better? It's gonna be my first setup and i'm worried about everything since i won't upgrade after that.. Hope it's gonna be as awesome as yours. Thanks for your answers in advance!

  • 28 months ago
  • 1 point

Of course if you buy a GTX1060 that is 6 GB. You can start with a mechanical HDD disk and later update with an SSD, which incidentally is essential on a computer today. I hope everything goes well in your assembly.

A greeting.

  • 28 months ago
  • 1 point

Amazing build! Loved your theme. I'm looking to buy the same motherboard, are you happy with it?

Also, that little red led at the bottom of the motherboard. Please tell you can turn that off.

  • 27 months ago
  • 1 point

I am very happy with the motherboard. I'm doing very well for several builds, I mount several and by far I think the best in chipset B350.

Unfortunately I have not managed to remove that led, nor is it bothering me too much.