Description

Hello everyone. My name is Senseurian and I have built my first PC. In the list I have excluded the RAM (Timetec 8GB DDR4 2133 MHz) and Case (shown in picture). I still haven't successfully booted into BIOS as when my CPU is connected to power the system enters a restart loop and I have no idea why and/or how to fix it. If anyone can help I'd appreciate it. 2 other things If I eventually figure out my problem and successfully boot into the BIOS will I be able to use a bluetooth Keyboard + Mouse connected via USB to nagivate the BIOS?

Also I'm using a USB wifi adapter that I don't remember the name of.

Log in to rate comments or to post a comment.

Comments

  • 28 months ago
  • 1 point

cool

  • 28 months ago
  • 1 point

Is your ram all the way in? I troubleshooted for about 2 days to get my pc to post and it turned out my ram was not all the way in.

  • 28 months ago
  • 1 point

Yeah I ran down through a list of troubleshooting and I checked that it waa pushed in. Also is it possible to post without RAM? My RAM may not be compatible

  • 28 months ago
  • 1 point

You need ram to post

  • 27 months ago
  • 1 point

Does this cpu works without bios update ? Some people are saying that ryzen 3 won't post without a new bios.

  • 28 months ago
  • 1 point

A wireless keyboard or mouse probably won't work, but there's no harm in trying. The Wi-Fi adapter should work fine in the OS, also, the BIOS doesn't have any reason to use Wi-Fi if I'm correct.

  • 28 months ago
  • 1 point

I'd give a clear CMOS, reseat everything and try again.

I've found that blutooth typically doesn't work in BIOS. However, a wireless mouse or keyboard with a dongle connected by USB will work in the BIOS.

  • 28 months ago
  • 1 point

I have cleared CMOS.I read my motherboard manual and it required me to place the jumper on the CMOS 1-2 pins to the 2-3 pins

  • 28 months ago
  • 1 point

Hey man see if your reset cable is put in correctly.

[comment deleted]
[comment deleted by staff]