-3/30/19: I Gutted the system a year ago and put it in a Hadron Air Case. Then updated it to a HTPC and then Gutted that for the Mobo since the one in the Hadron bricked and stuck the cpu in a SLI build. I liked the system so much though i decided to replace my brothers hammy down fx-6300 that i was going to replace with a 8370, but he wants to play the demanding Battlefield 5. So I basically bought the same components and there for did not make a new completed build for this build. I decided to have him make it himself too, with me just giving him pointers and walking him through. I picked up the board cheap, replaced my cpu with a r7 and gave him my r5. I could then use thed wraith RGB cooler that comes with the r7 (he said it was his favorite part about it) since i have a 212 for the r7 and burnt out the old r5 cooler overclocking. Luckily ram is alot cheaper then when i got mine. I had the psu, case, and fans left over so buying the storage and ram was pretty cheap. I use the 1060 3gb when i travel since my 1070 has fans zipped tied to it and does not fare well on trips. Only really needing it for presentations or last minute editing on the go. So i only really need a output. I got a few rx 570 real cheap and gave him the 1060. I know its the 3gb, but his last gpu was the 970 and there pretty equal in performance. So he can get the 1660 ti in the future if they get cheaper. As well as upgrading with another SSD for more games.
-Downgrade 11/28/17: So i decided i like the ITX over my Sli editing rig and decided to do a new build but have it be a better ITX. So i decided to take the VGA,RAM,Motherboard,CPU cooler and fans from this rig and make it a actual cheap under 1000 ITX build. Got the same motherboard, added a R5 1600, added 2400 ram, added a 1060 3gb, added the stock cooler and removed two bottom fans. Good thing black Friday was this week so i got them all for under 300 to replace the parts. I had a extra PM961 laying around that i was using as a external storage. Will use this as a HTPC pc since its perfect for that on the tv; does surprisingly well since 1080p scales to the 4k tv.
-Update 9/30/17: http://www.userbenchmark.com/UserRun/11162986
GTX 1070 GPU,
Flare X 3200 RAM,
4x NF-A12x15 fan,
-Got the Gpu to oc to a good speed but asus tweak kinda only go's to +88 mhz which really isn't much though it coil whines alot and don't plan on pushing. I did get my cpu to 3.75, both the r7 1700 and r5 1600 sit at 3.7 with 1.2819v. May have too much thermal paste on the r5 but its hitting 1.38 to stay at 3.8 and that gives me 80c which is not good since i have to have fans max and negative air pressure. I worked it up from 3.7 to 3.75 at a 1 to 2 ratio increment increase giving me better performance with out massive thermal gain. I don't know why but after testing it and id leave CPB on my cpu was hitting 4 ghz on all cores when it could and sometimes boosting 2 cores higher. I put my 3200 ram into my r5 for gaming boost and luckily gskill got that kit to 3466 so i just took there timings of 16-16-16-36, but probably could do better. So after dumping a grand into this computer i feel like maybe i should of spent the a extra 50 on the case for a better one and maybe another 50 on the motherboard. It was suppose to be a budget build because i had the motherboard left over from another build. I just love the form factor though and it definitely isn't better for heavy workloads compared to my r7. But it runs at the same speed with 6 cores and has a single 1070 that is better then my sli 970's so......
- -Update 4/29/17: http://www.userbenchmark.com/UserRun/8519969 Broke the wraith spire making it my 5th AMD stock cooler to have its fan brake, just not made for full speed. So i got the Noctua NH-U9S with AM4 bracket and was very easy to install. Including CPU and GPU there are 10 fans in this tiny case. I may have to add another cpu fan and one more side fan just to get max cooling; plus i can lower the rpm for quieter operation. Beside for maybe getting a 1070 for it in the future or trying out liquid metal thermal grease. This build is basically done so time to build a new one.
-Update 4/9/17: http://www.userbenchmark.com/UserRun/8225127 This build has replaced my main computer instead of being downgraded to a apu with no gpu, but gets a upgrade to a 1070 when prices are cheaper. Added a SSD as well as several NF-A12x15 fans because the 970 puts out heat and puts the psu under load so it gets hot. Adding 2 fans on bottom and top was necessary. I put a lunch tray upside down to get it off the floor because it was collecting most of the dust on the floor. I also bought half inch rubber nubs for the bottom so it could draw air from the sides of the case and not just the tiny whole in the back.
-Ignore this part list.
--I had to send out my other motherboard with SLI and the big case was pointless, but i also wanted a ITX setup for playing single player games on the big screen with out a big computer next to it. So i decided to make a new computer in ITX form as cheap as i could but still preform well. I also possibly wanted to get a APU in the future and the ITX would be perfect for that. -The case: $50 QBX is the only non cube or slim rectangle case for cheap i could find. Wanting to upgrade to a APU with overclocking head room its support of bigger coolers was a great benefit. -The cpu: $170 Ryzen 5 1600 is really the best value for the performance. -The board: $108 ASRock AB350 ITX with M.2, integrated wifi, and being cheap for a ITX was good. Has a ton of extras i will never touch like RGB. -The ram: $170 Flare X 2400, ram is expensive and having had luck with G.skill i just bought there cheap version -The storage: $98 PM961 the cheap evo?
-The vga: $200 MSI 970, You can get used 970 for around 200 and its pretty good deal. With not really noticeable performance difference from the 1060 6g at half the price. -The psu: $40 EVGA 500w BQ was the only evga psu with under 140mm L and semi-mod. Unfortunately its not QBX compatible so the cord does stop you from being able to install the OOD slim cd drive, but it your don't want a cd drive you should be fine. -The fan: $15 NF-A8 is quiet and powerful $850 total cost before upgrades. -
I wish i got a APU just to test, but they where not released when i got this, might be smart to wait if you can for the zen+ 2020 might be even different ones.
It's adorable and has all that extra stuff
Preforming better then i expected, got to run 2800 no problem, but i think i am going to mess this timings instead of getting 3000 since it messes with cpu oc.
I don't understand this drive, why Samsung? cheap and gives 237GB of space
Get the 6GB version; I got one during the mining crises and this one on black Friday since it was 100 less then the 6gb one. They are basically 970's with faster 3gb ram then 3.5 and new features.
does not work, or certified for my case plug orientation. However this only blocks cd drive if your installing one. Great affordable semi mod that's 140mm L. The case i have as the psu right in the front top so you can easily hear it if you want to, but it very quiet compared to the cpu fan under load.
Cheap noctua, can't really beat that
I love this case for the single reason that it is not a cube or looks like a cable box. looks computer-ish and is not as expensive as a N1? or any other itx while supporting a atx psu and full size gpu. The main hurdle with this case is that the bottom fans pull air from a tiny gap in the back. Having it not be modular case is a good and bad thing. But with the 970 being super hot you need the two fans on the bottom and it still cant draw in enoughf cool air, so i got sum half inch rubber nubs for the bottom and if could pull air from all sides. Then put it on a upside-down lunch tray with front over the edge so air can go in the front because its blocked for some reason. With this it actually runs really cool compared to my full desktop 970.