Description

This is the third and final iteration of this build.

Next build will be designed for 4k gaming, so I'd probably use a mid-tower case instead.

Easily runs 80+ FPS on AAA Games at Ultra.

GPU is overclocked via ASUS GPU Tweak II.

CPU/ Memory are overclocked via BIOS.

https://www.userbenchmark.com/UserRun/18588349

Log in to rate comments or to post a comment.

Comments

  • 10 months ago
  • 2 points

There is one area case designers really need to address. The placement of the PSU and the cables. In your scenario we have a mini ITX case with a PSU designed with cables to run through full towers if need be. A full tower worth of cable length in a mini Itx case. The way around it is very expensive - custom length cables for your very application. Other option is to build your own cables. Other than the psu cables too long and nowhere to go issue (common in 99% of builds), you did a good job.

  • 10 months ago
  • 1 point

Thanks! Cable management seriously took me hours of trial and OCD. It's as good as it can get without as you said custom cables.

  • 10 months ago
  • 1 point

Temps ?

  • 10 months ago
  • 1 point

CPU idles around 40C OC'd to 3.8 at 1.38. Maxes at high 60s in game. Stays around 55 in a AAA game. GPU is OC'd to the max and peaks low 80s, usually is right around 66C in game. The rest of the machine is around 40C idle and won't get above 55C.

  • 10 months ago
  • 1 point

Cool

  • 10 months ago
  • 1 point

Rigged up three Corsair ML120 fans, two in a push-pull configuration on the radiator, and one extremely Jerry rigged one angled towards the motherboard at the top of the case. It has been very effective at keeping the OC'd machine cool and stable.

  • 9 months ago
  • 1 point

I have been using this for my HTPC for the past couple of years. Can't complain no cable. Thou I would love to upgrade to the Phanteks Evolve Shift. This may not be a pretty but it gets the job down & I have a DVD player attached to it.