PCPartPicker

  • Log In
  • Register

$1250 Gaming PC Build - ASUS STRIX B250F Gaming / i5-7500

Recent Posts

March 2017

February 2017

January 2017

December 2016

November 2016

October 2016

September 2016

August 2016

July 2016

June 2016

May 2016

April 2016

March 2016

February 2016

January 2016

November 2015

October 2015

September 2015

August 2015

July 2015

June 2015

May 2015

March 2015

February 2015

November 2014

October 2014

September 2014

August 2014

July 2014

June 2014

May 2014

April 2014

March 2014

February 2014

January 2014

December 2013

November 2013

October 2013

August 2013

July 2013

June 2013

May 2013

April 2013

March 2013

January 2013

December 2012

November 2012

October 2012

September 2012

August 2012

July 2012

April 2012

March 2012

Post

BoyScout Feb. 24, 2017

For this month's featured build guide video, we started with our Great Gaming Build Guide, but added a few tweaks.

We wanted a motherboard with RGB LED support to allow us to easily add a software controllable strip along the LED light channel in the DUKASE V2. The ASUS Strix B250F with Aura support fit the bill. We also wanted to upgrade the CPU Cooler to something a bit nicer than the stock cooler to improve the overall look of the build through the case's large side window.

Check the part list below to see our final selections and watch the video to see how it came together.

A special thanks to ASUS for providing the motherboard and graphics card used in this build.

To see how Barry got the cables under control, be sure to check out the cable management time lapse video:

To see some benchmarks and see some final build pictures, check out the Completed Build write up.

PCPartPicker part list

Type Item Price
CPU Intel Core i5-7500 3.4GHz Quad-Core Processor $201.89
CPU Cooler CRYORIG H7 49.0 CFM CPU Cooler $34.99
Motherboard Asus STRIX B250F GAMING ATX LGA1151 Motherboard $129.99
Memory Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-2400 Memory $96.99
Storage PNY CS1311 480GB 2.5" Solid State Drive $119.99
Storage Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive $69.99
Video Card Asus GeForce GTX 1070 8GB Video Card $429.99
Case Deepcool DUKASE WHV2 ATX Mid Tower Case $49.99
Power Supply EVGA 650W 80+ Gold Certified Semi-Modular ATX Power Supply $73.50
Other CableMod® WideBeam™ Magnetic LED Strip RGB $19.99
Total at time of filming $1227.31

Comments Sorted by:

Specter-Builds 7 points 1 month ago

I Like the look Asus is putting on their new generation of motherboards, would like to see a z270 Asus build though.

joeseppie113 1 Build 1 point 28 days ago

same

tussiez 1 point 7 days ago

same

[comment deleted]
[comment deleted]
[comment deleted]
Berfs1 1 Build 1 point 6 days ago

lol go to home page and they have one with a 7700K lol

Specter-Builds 1 point 4 days ago

As far as I know there is no Asus z270 i7 7700k build... are you referring to the gigabyte build?

Berfs1 1 Build 1 point 2 days ago

Oh Asus. I thought you meant just a Z270 build. My bad!

NicoSalis 5 points 1 month ago

What do you do with your PC builds after you are done making the videos on them?

BoyScout staff submitter 7 Builds 2 points 22 days ago

It varies. Some are put to work around the office for assorted tasks as-is or with minor changes. On occasion, some parts are on loan and must be sent back to the manufacturer. But most are disassembled after a few weeks of testing and the parts (depending on what they are) usually get absorbed into other projects or future videos/content.

dalekusa 4 points 20 days ago

Why did you use a Cryorig cooler on a non-overclockable mobo and CPU?

BoyScout staff submitter 7 Builds 1 point 20 days ago

It's mostly for something nicer to look at through the large case window. Considering the assorted RGB/lighting upgrades, the stock cooler didn't feel right. You can get a bit more insight into the part selection rationale by reading the completed build write-up if you'd like.

BigAll 5 Builds 1 point 20 hours ago

Imo the c7 would've accented nicely with the case too.

BoyScout staff submitter 7 Builds 1 point 19 hours ago

Agreed -- the C7 would also look nice and right there in that same "minor upgrade" price range, though it does change the air flow a bit. We used the C7 a few months back in a build, so since we had a bigger case to work with this time around, we wanted to give the H7 a try. Both were pleasant to work with and seemed to perform well.

seraphicx 3 points 14 days ago

Fantastic guide! I followed the tutorial (mostly) to the letter and have a great new machine that replaced my aging 4-year build. It was my first done completely solo without the aid of a friend who had done it before! These tutorials are incredibly empowering and professionally done. Please do more.

A few comments about the end product:

  • This build is wicked silent. My old computer (built in a Corsair 500R) was a clanker compared to this. You can hardly notice it's on if it weren't for the rainbow LED's.
  • When the machine is powered off, the mobo oscillates colors by default. Makes a pretty night light.
  • Tested with Battlefield 1 and Rainbow Six Siege with all settings maxed to ultra - R6 runs in the mid to high 100's. Battlefield never dipped below 60 fps in 64 player games of Conquest and Operations. Looking forward to seeing how ME: Andromeda plays this week.
  • I passed on the RPM drive and instead used two large SSD's. I used an EVGA 1070 instead of the Asus card here, but only because I had it on my old machine.

Some words of warning to newbies like me trying this for the first time:

  • Be really careful about getting the standoffs properly inserted before securing the CYRORIG. The thing nearly fell off when I tipped the mobo over to tighten the screws, because one of the standoffs wasn't depressed all the way.
  • The Intel chips are getting really small (at least the i5-7500 seemed smaller than the chips from my last two builds), so don't overdo the thermal paste.
  • Wire management gets trickier if you use both SSD bays. The extra SATA power cable is a pain to get through the case hole.

Out of curiosity, what other upgrades would be worth doing to this? I noticed the DUKASE has an empty fan bay on the top of the case. It would be cool if you all did a follow up video on more mods you can make to it. Not sure how much flexibility there is, but would be good to know what else you could do with it.

All in all, thank you so much PCPP! This was a fantastic and enjoyable weekend project.

BoyScout staff submitter 7 Builds 2 points 14 days ago

Glad to hear the video was helpful and congrats on your first solo build!

seraphicx 1 point 14 days ago

Thanks! Any thoughts on future expansion/upgrades re: the DUKASE?

BoyScout staff submitter 7 Builds 1 point 13 days ago

Lots of possibilities. The case has a fair bit of room for expansion, so it mostly depends on how your needs change over time.

pragz28 1 point 26 days ago

Where do they connect the anti static wrist wrap??

BoyScout staff submitter 7 Builds 1 point 22 days ago

It connected to a resistive circuit that you can kind of make out attached to our anti-static mat (left side of the table when watching the videos), then that is wired to an electrical ground.

[comment deleted by staff]
xJackson 1 point 21 days ago

This is no joke almost exactly what I've had in my list for the past couple of days haha

andhypno 1 Build 1 point 21 days ago

Just wow i wish i could have those cable management skills :D is just awesome would like to learn about that. very nice build btw..

simaczysko 1 point 20 days ago

Hi. In the original Great Gaming Build, did the mobo work with the i5 right out of the box or did you have to update the firmware?

BoyScout staff submitter 7 Builds 1 point 20 days ago

I'm not sure if I understand exactly what you're asking, but the build guide we based this on uses a parametric selection of Kaby Lake motherboards that shouldn't need a firmware update just to use the i5-7500. That said, most boards generally have a few UEFI/BIOS updates shortly after they release, so it is probably worth checking on after you get your system built.

simaczysko 1 point 17 days ago

Hi. Thank you for reply. I built it and it powered on fine. When I press restart it reboots without an issue but when i shut it down and then try to turn it on, pc starts for a sec then goes off. Then just stays in this loop. I need to force power off, power on/off few times and eventually it will work. Any ideas why this is happening? Can I send you a video if you need it?

simaczysko 1 point 14 days ago

I should also add that to turn in on right after I powered it down I need to flip the PSU switch off for a min then flip it on and start the PC. If I shut the PC off for the night them it runs fine. Like the power needs to be drained before your can do a cold boot. Any ideas?

BoyScout staff submitter 7 Builds 1 point 14 days ago

Sorry, I missed your reply. I'd recommend you head over to our Troubleshooting forum and post your question to get more help.

kubaj 1 point 16 days ago

is possible to put in these build an optical drive

BoyScout staff submitter 7 Builds 1 point 15 days ago

Sure -- the DUKASE V2 has two 5.25" bays, so you could easily add an optical drive to this build if that's something you'd want.

kubaj 1 point 15 days ago

thanks

mydaoqq 1 point 13 days ago

Very useful. Thank you. I am wondering will there be a new game PC build released this month soon?

BoyScout staff submitter 7 Builds 1 point 13 days ago

Thanks -- glad you enjoyed it.

And yes, we have several new build videos in the works as well as a couple more live streams planned. Stay tuned!

Carbon47 1 point 9 days ago

Would the pc still work as good with the stock cooler? Just wondering if you got the upgrade just for looks or it's actually needed in this build. thanks

BoyScout staff submitter 7 Builds 1 point 9 days ago

It would still work fine with the stock cooler. And yes, the Cryorig H7 was mostly added to complement the look of the build since it has a window on the case. It's also a fair bit quieter than the stock cooler if that's a concern for your build.

Carbon47 1 point 8 days ago

thanks a lot for the response. Would you recommend that build for someone who tries to get the best value for his money? The PC looks very nice and all but I'd like to know if I could get a better value for more or less money. thanks again BoyScout! :)

BoyScout staff submitter 7 Builds 1 point 8 days ago

For this build video, we decided to start with the Great Gaming Build Guide, which comes in around $1000 USD. Then we added the extra personal touches and upgrades we wanted until we hit our goal for this build (which was $1300). So it's not perfectly tunes to value/dollar, as we made some choices like your mentioned based on aesthetics.

If you're trying to squeeze a better price/performance out of this build, you'll likely make some changes (the same $1250 USD could be used with our Excellent Gaming Build Guide, for example). It comes down to the balance of where you are willing to spend your money.

And of course, you'll want to also keep in mind a budget for your operating system and accessories (mouse, keyboard, monitor) if you are building from scratch.

R3DL1G3RZ3R0 1 point 6 days ago

Brother, thanks for another awesome build guide! The way these videos are edited is my favorite part, limiting the cuts in post and leaving in even the small hands on build details (showing each screw installation, how your flipping the mobo and resting it down, etc.) is genius. It adds a layer of dynamic detail that n00bs like me greatly appreciate and adds to the feeling that we're right there with ya hanging out for the build.

iamsalar 1 point 4 days ago

Just in case you were looking for some who followed through on the guide, here I am.

The only changes I made was step up to the beefier i5-7600K, step down to the Cooler Master Hyper 212 Evo, and downgrade to a Samsung 250GB Evo drive. (two 'Evo' tagged parts in one machine, where's my cookie?) In case you're nervous about the changes, don't be.

This build cost me $1,749 CAD (including taxes) to put together within 2 days. The breakdown:

  • Amazon Canada ($647) - the ASUS card
  • Newegg Canada ($610) - the Deepcool case, ASUS motherboard, EVGA power supply, Corsair memory and CM fan
  • NCIX Canada ($492) - the 7600K processor and Samsung SSD

I should be getting the card tomorrow via Amazon. Looking forward to the completion.

Namnguyen -12 points 1 month ago

"Im really am an Asus rog fanboy."

Why not go for a 7600k, btw nice build though.

SuperSonic14045 1 Build 10 points 1 month ago

The Intel Core i5 7600K would be an unwise choice with a motherboard with the B250 chipset, since it would be impossible to overclock it.

Namnguyen 1 point 22 days ago

i forgot to say about the asus strix z270 motherboard on the 7600k

JohnMiller92 7 points 1 month ago

Yeah, 7600k on a 250 motherboard. Nice logic u got there

ATeensTwoCents 1 point 21 days ago

"I'm really am," nice grammar there, mate.

[comment deleted]
[comment deleted]
[comment deleted]
[comment deleted]